emergency locksmith

Door Repair in Aurora: Heritage Homes to Industrial Parkway

Aurora mixes old and new, and its doors do too. Houses in the Northeast Old Aurora heritage district still have doors and hardware from the late 1800s and early 1900s, Bayview Wellington and Aurora Grove are family subdivisions, and Industrial Parkway is lined with businesses. Go Locksmith And Doors repairs doors in all of them, 24/7.

From our shop in North York we come north on Yonge Street and Highway 404. Phone 647-955-6055 and describe the problem for a free estimate.

Original doors in Northeast Old Aurora

Older doors near Yonge and Wellington often have mortise locks, worn strike plates or frames that have shifted, which makes them hard to lock.

We try to keep the original door. Stripped screw holes are filled and re-drilled, longer screws go through to the wall framing, and the strike is moved so the bolt catches again. A cracked frame can often be fixed with wood filler and reinforced. Drafts usually come from worn weatherstripping and a door that has dropped out of line, and a new sweep plus realignment closes the gap. All of this is residential door repair.

Automatic and handicap door openers for Aurora businesses

We install and repair automatic and handicap door openers for shops, offices, clinics and condo buildings. They make entrances easier for people using walkers, wheelchairs or strollers, so an opener that quits is a real problem for the people who rely on it.

Most faults come from a short list: power, the push buttons (wired or wireless), the sensors, the operator arm, or a lock that is still engaged. We go through them in order and fix the cause on the visit when we carry the part. An opener can also be added to an existing swing door that swings freely, so we check the hinges and closer first. See automatic and handicap door openers.

Storefronts on Yonge Street and plazas on Wellington Street East

At the shops and restaurants downtown on Yonge Street and the plazas on Wellington Street East, the front door is the part of the business every customer touches.

  • A heavy aluminum door that has dropped gets a continuous hinge, which holds it from top to bottom.
  • A door closer that slams, leaks or stops short of the latch is adjusted or replaced.
  • Exit doors at the back get panic bar repair.
  • Cracked glass in the door is boarded up and then replaced (glass replacement).

For units along Industrial Parkway we repair steel doors, frames and exit hardware. More on storefront door repair and commercial door repair.

Emergency door repair after a break-in in Aurora

After a break-in at a home in Aurora Highlands, a business on Industrial Parkway or anywhere else in town, we repair the frame, door and lock and secure the property. We come out day or night, so you can stay there safely.

A kicked door usually fails at the frame. The lasting fix is a reinforced strike plate with long screws into the framing, solid hinges and a good deadbolt. If keys went missing, we rekey the other locks too. Both emergency door repair and break-in door repair are available around the clock.

Sliding doors in Bayview Wellington and Aurora Grove

Sliding doors in Bayview Wellington and Aurora Grove family homes get a lot of use. If yours drags or won’t lock, we replace rollers, tracks, handles and locks. Don’t force a door that is hard to slide, because that can damage the frame and the glass. Details are on patio and sliding door repair.

Aurora areas and roads

We work in Downtown Aurora at Yonge and Wellington, the Northeast Old Aurora heritage district, Aurora Village and Aurora Heights, Aurora Highlands, Hills of St. Andrew, Aurora Grove and Aurora Estates, Bayview Wellington, Bayview Northeast and Bayview Southeast, and the Industrial Parkway business area.

The roads on our Aurora calls are Yonge Street, Wellington Street, Bayview Avenue, Leslie Street, Industrial Parkway, St. John’s Sideroad, Bloomington Road and Highway 404. Lock work is on the Aurora locksmith page and the full list of services on door repair. Neighbouring door pages: Newmarket to the north and Richmond Hill to the south.

Prices

Service call + 1st hour of labour starts from $175.

The final price depends on the job and the parts you need. Call 647-955-6055 to get a price for your job.

Aurora door repair: what people ask us

Most likely. On busy commercial doors, worn hinge knuckles, loose screws or a frame torn around the hinge let the door drop on the latch side. We replace the hinges, often with a continuous hinge, then realign the door, the latch and the closer.

Whatever the door, a service call plus the first hour of labour starts from $175 in Aurora. After that it depends on the work and the parts, such as a hinge, a closer or a new lock. Phone 647-955-6055 and describe the door for a free estimate.

Keep people away from it, because cracked tempered glass can suddenly break apart. We board up the door so the shop can be locked, then order new glass made to size, which takes 1-3 days for single glass and 3-10 days for double glazed. Then we install it. We replace commercial glass, including the glass in store doors.

The oil inside the door closer thickens in the cold, so the door slows down and stops short of the latch. A door that does not latch is a door that is not locked. We readjust the closer for the season, or replace it with one that copes better with temperature changes.

Yes. We have technicians working across York Region and the GTA 24/7, holidays included. Give us your Aurora address on 647-955-6055 and we’ll say when a technician can be there.

Need a door fixed in Aurora? Call us 24/7

We are open 24 hours a day, 7 days a week, including holidays.

Rate this page