You are currently viewing Aluminum Door Replacement in Oakville: Before and After
After: new aluminum door installed at the same Oakville pharmacy

Aluminum Door Replacement in Oakville: Before and After

This job story comes from Oakville. The photos show a door replacement at a pharmacy entrance, all taken on the same day. The old aluminum door comes out, and a new aluminum door goes into the same opening.

What the photos show

The first photo is the old door at the start of the job. It is an aluminum storefront door with a bar across the middle. The tools are already out on the mat inside.

Before: old aluminum door at a pharmacy entrance in Oakville
Before: old aluminum door at a pharmacy entrance in Oakville

In the second photo the old door is off. It leans against the wall outside, and the opening is empty, with a step ladder and a tool case ready for the new door.

Old aluminum door taken off and the opening ready for the new door
Old aluminum door taken off and the opening ready for the new door

The third photo is the same entrance later that day. The new aluminum door is in, with a solid aluminum panel, a pull handle and a lock.

After: new aluminum door installed at the same Oakville pharmacy
After: new aluminum door installed at the same Oakville pharmacy

Why an aluminum storefront door ends up being replaced

The entrance of your business is the first impression you make on your customers. Unfortunately, a storefront door with an aluminum frame may rust and break at least once in 3 or 4 years. These are the problems we see on aluminum doors:

  • The door sags out of square, because years of heavy use and closer pressure loosen the corner joints.
  • Worn pivots or hinges make the door drop, scrape the threshold or close unevenly.
  • The closer slams the door, leaks oil or won’t let it latch.
  • The frame is bent or broken in a break-in.
  • The glass in the door is cracked or broken.

Repair first, replace when it cannot be saved

A damaged storefront door usually does not need to be fully replaced. Most problems come from parts that can be replaced on their own, such as pivots, hinges, closers, locks, handles or glass. A full new door makes more sense when the aluminum frame is corroded, bent or cracked badly enough that repairs won’t hold. Our technicians can repair the existing door or provide a complete replacement. For a new door, we make finding the right door supplier a priority.

Time matters when it is the entrance of your business. We work quickly and efficiently, so your business is not affected. In this job the before photo and the after photo were taken on the same day. Our storefront door repair page lists everything we fix on aluminum doors.

What to do if your door looks worn out

  • The door sags, drags or will not close. It is often the hinge, not the door. We replace broken hinges and install continuous hinges, the most common fix for heavy aluminum doors.
  • The door slams or will not latch. The closer may need adjusting or replacing. See door closer repair.
  • The glass is broken. We come, board it up so the door can be locked, and order the new glass. Single glass is ready in 1-3 days, and double-glazed glass takes 3-10 days. See glass door repair.
  • The door will not lock at closing time. Never leave the business unlocked overnight. Call us for emergency door repair, 24/7.
  • Not sure whether to repair or replace? Call us with the door details and we will give you a truthful estimate, free by phone.

Service call + 1st hour of labour starts from $175. The total depends on the door and the parts it needs. Every job comes with a guarantee and a 90-day warranty.

Have the same problem?

If the aluminum door at your store, pharmacy, office or plaza is rusted, bent or worn out, call 647-955-6055. We are open 24/7, including holidays, and our technicians work in Oakville and across the GTA. For more about our door work in the area, see door repair in Oakville and our commercial door repair page.

Rate this post