This job story comes from Toronto, at a daycare. The entrance has automatic doors, and a sign on the door says it is broken. The photos were taken on the same visit, while the operator above the door was opened up for repair.
What the photos show
The first photo is the front of the daycare. The entrance is a pair of aluminum and glass doors with long pull handles. A sign taped to the glass warns people that the door is broken.

In the second photo the cover of the header above the door is off. Inside sits the operator, the motor unit that swings the door open and closed, with its wiring.

The third photo is a closer look at the operator. Its label reads “fire door operator with automatic closer”.

The last photo shows the controls in the same header: the circuit board, a power switch, and a switch with three settings, off, auto on and hold open.

Why automatic doors stop working
When an automatic door stops working, customers, tenants and staff can’t get in, and the entrance may not lock at night. These are the problems we fix most often:
- The door won’t open, or opens only partway.
- The door won’t close, stays open or reverses before it closes.
- The door opens too fast or too slowly, or slams.
- Grinding, clicking or banging from the operator.
- Sensors that don’t see people, or open the door for no reason.
- Push buttons, wired or wireless, that don’t work.
Common causes are a power problem, dead batteries in a wireless push button, dirty or misaligned sensors, the operator switched to off or hold open, or a lock that is still engaged. A loose arm or a worn operator can also stop the door.
Repair first, replace when it cannot be saved
We check the power, sensors, push buttons, operator, arm and lock, find the cause and fix it, on the same visit whenever we have the part. If a part has to be ordered, we make the door safe and lockable first. We also adjust the opening speed, hold-open time and force, so the door opens safely and closes fully. When an operator is worn out, we supply and install a new one.
A handicap door opener that doesn’t work is a real problem for the people who rely on it, and in a public building it is an accessibility issue. We repair low-energy swing door operators, push-to-open buttons, wireless transmitters and receivers, and the electric strikes that release the door. Our automatic door repair page has the full list.
What to do if your automatic door stops working
- Warn people at the door. A sign like the one in the first photo stops people from walking into a door that may not open.
- The door will not lock at closing time. Do not leave the entrance open overnight. We come out for emergency door repair 24/7, holidays included.
- The push button does nothing. If it is a wireless button, the battery may be dead. If a new battery does not help, call us.
- The door sags, drags or rubs. An operator needs a door that swings freely, so we check the door, hinges and closer too. See storefront door repair and continuous hinge repair.
Service call + 1st hour of labour starts from $175. The final price depends on the job and the parts you need. The estimate by phone is free, and our work comes with a guarantee and a 90-day warranty.
Have the same problem?
If the automatic door at your store, office, clinic or condo will not open, will not close or makes noise, call 647-955-6055. We are open 24/7, including holidays. We repair automatic sliding doors, swing door operators and handicap door openers in Toronto and across the GTA.