Door Repair in Concord for Warehouses, Showrooms and Homes
Concord is the industrial part of Vaughan. Between Highway 400 and Dufferin Street there are warehouses, industrial units, showrooms and offices, plus the condo towers of the Vaughan Metropolitan Centre and the homes of Glen Shields. Go Locksmith And Doors keeps their doors working 24/7, from a jammed steel door at the back of a warehouse to a showroom entrance that won’t lock.
Phone 647-955-6055 any time. Tell us the door type and what it is doing, and you get a free estimate by phone.
Warehouse and industrial unit doors on Bowes, Creditstone and Edgeley
The steel doors on Bowes Road, Creditstone Road and Edgeley Boulevard get used hard, by pallet jacks, deliveries and staff going in and out. We repair hollow metal doors and frames, torn hinge reinforcements, dented doors that rub, and doors that won’t latch.
- Hinges. On heavy steel and fire-rated doors we fit stainless pin and barrel hinges or a full-length continuous hinge.
- Exit hardware. Panic bars stop latching because of worn parts, loose screws or a sagging door. An exit door that won’t release is a safety issue and shouldn’t wait.
- Closers. A closer that leaks oil has failed seals and needs replacing (door closer repair).
When a steel door is rusted through or too bent to fix, we use the right door suppliers to find a replacement for the opening. See commercial door repair.
Showroom and office entrances on Highway 7 and Steeles Avenue West
The offices and showrooms along Highway 7, Steeles Avenue West and Langstaff Road usually have aluminum and glass entrances. If a pallet jack, a break-in or a slammed door cracks the glass, we secure the opening and order tempered or laminated safety glass made to size (glass replacement). The door, frame and hardware stay.
For entrances that have to be accessible, we install and repair automatic and handicap door openers. An electric strike can be connected so the push button only opens the door when it is unlocked, or after a fob or code is accepted. The entrance stays accessible in the day and secure at night. Storefront door repair covers the pivots, closers, locks and push bars on these doors.
Emergency door repair for units that sit empty overnight
A unit with nobody in it from closing time until morning is an easy target. If yours was pried open, call at any hour. We straighten and reinforce the door edge where we can, fit a temporary lock or board up the opening, so the unit can be locked again that night.
The permanent fix follows: a repaired or new frame, a stronger strike and a new lock. If you need a new door before an early morning client meeting, we’ve got you covered. Read about emergency door repair and what break-in door repair includes.
Recent door jobs in Concord: old door out, new steel door in
Most of our Concord photos are about replacing a door:
- Before: the old door and frame removed at a business.
- After: a new steel door installed at the same business.
- A new door slab, ready to install.
- A new deadbolt and knob on a steel door.
- Lever door handles.
When a door or frame is too bent to close and lock, replacing both is the right repair. More of our work is on the main door repair page.
Concord, from the VMC to Glen Shields
We work in the Vaughan Metropolitan Centre at Jane and Highway 7, Edgeley Boulevard and Interchange Way, Old Concord village at Highway 7 and Keele, Concord West, Glen Shields, the Bowes and Creditstone industrial area, and the business parks on Steeles Avenue West and Langstaff Road. Our technicians use Highway 7, Highway 407, Highway 400, Jane Street, Keele Street and Dufferin Street.
Homes need doors too. Many houses in Glen Shields date from the 1970s and 80s, and their entry doors sag and stop latching (residential door repair). VMC condo balcony doors stick on worn rollers (sliding door repair). For lock work, see locksmith in Concord. Around Concord we also cover door repair in Vaughan, Woodbridge and North York.
Prices
Service call + 1st hour of labour starts from $175.
The final price depends on the job and the parts you need. Call 647-955-6055 to get a price for your job.
What Concord businesses ask about their doors
Our warehouse door is too bent to lock. Do you supply the new door?
Yes. We take out the damaged door and frame, install a new steel door in the same opening and fit the hardware. The two before and after photos on this page come from that kind of job in Concord.
How is commercial door repair priced in Concord?
For any door in Concord, a service call plus the first hour of labour starts from $175. Commercial-grade closers, exit devices and hinges cost more than residential ones, and the grade you choose affects the total. Call 647-955-6055 with the door details.
A pallet jack cracked the glass in our office entrance. How long until it's replaced?
On the first visit we board up or secure the entrance, so the office can lock. Then the new glass is made to size, 1-3 days for single glass and 3-10 days for double glazed. We do commercial glass, such as showroom and office entrances, storefronts and the glass in aluminum doors.
The panic bar on our rear exit won't latch. Is it the bar or the door?
Both are possible. Parts and screws inside the bar wear loose, vertical rod devices go out of adjustment at the top or bottom, and a door that has sagged carries the latch past the strike. We find which one it is and repair or replace that part.
Can you replace the hinges on a fire-rated door in our unit?
Yes. A fire-rated door needs hinges rated for that use so it keeps its rating, and it must still close and latch on its own afterwards. We fit suitable hinges and adjust the closer and latch. If your building has its own rules, the building manager or fire inspector will know them.
Concord door jammed, forced or broken? Call now
We are open 24 hours a day, 7 days a week, including holidays.




