Continuous Hinge Replacement & Broken Door Hinge Repair
Sagging, Dragging Or Hard-To-Close Commercial Door? Go Locksmith And Doors replaces and installs continuous hinges on storefront, aluminum, hollow metal and wood doors across Toronto, North York, Vaughan and the GTA, 24/7.
We fix the hinge, realign the door and adjust the closer, lock and panic hardware, all in one visit.
Signs Your Door Needs A New Hinge
Door Is Sagging
The door drops on the latch side and rubs the frame or threshold.
Won't Close Or Latch
Worn hinges throw the door out of line, so the lock or panic bar stops catching.
Gaps And Drafts
Uneven gaps around the door let in cold air, water and pests.
Broken Or Torn Hinge
Cracked knuckles, stripped screws or a torn frame after heavy traffic or a break-in.
Broken Door Hinge Repair For Homes And Businesses
A broken hinge can leave a door hanging, scraping the floor or impossible to lock. We repair and replace broken door hinges on front doors, back doors, interior doors, storefronts, office doors and apartment entrances across Toronto and the GTA, 24/7.
Broken hinge problems we fix
- Hinge screws pulled out of the frame or the door (stripped screw holes)
- Cracked or snapped hinge knuckles and bent hinge leaves
- Hinges torn out of the frame after a break-in or a strong wind
- Self-closing spring hinges that no longer close the door
- Worn pivots and continuous hinges on storefront and commercial doors
- Doors that dropped and now rub, stick or won't latch
We fix stripped screw holes, replace the hinge with the right size and weight rating, rehang and realign the door, and adjust the lock, latch and closer so the door closes and locks properly. If the frame is damaged around the hinge, we repair it on the same visit or secure the door until it can be fixed. Need more than a hinge? See residential door repair, commercial door repair, storefront door repair and break-in door repair.
Our Continuous Hinge Services
- Continuous Hinge Replacement: we remove worn butt hinges or old continuous hinges and fit a new full-length hinge.
- New Installation: we upgrade high-traffic doors from butt hinges or pivots to a continuous hinge for a longer service life.
- Geared Continuous Hinges: concealed, full-surface and half-surface types for aluminum storefront and hollow metal doors.
- Pin & Barrel Hinges: heavy-duty stainless steel hinges for steel and fire-rated doors.
- Door Realignment: we adjust the closer, latch and panic hardware after the hinge work so the door closes and locks properly.
- Break-In & Emergency Repair: we secure damaged doors fast, day or night (see emergency door repair).
Doors We Work On
Aluminum storefront doors, hollow metal doors, fire-rated doors, wood commercial doors, office and condo entrances, retail stores, restaurants, warehouses and apartment buildings.
Why Businesses Call Go Locksmith And Doors
- 24/7 emergency service: a broken door can't wait until Monday.
- Same-day service in most of Toronto, North York and Vaughan.
- Over 10 years of commercial door experience.
- One call covers the door, the hinge, the closer and the lock.
Need A Continuous Hinge Replaced Today?
Call now for fast service anywhere in the GTA, 24/7.
Call 647-955-6055Service Areas
Toronto, North York, Vaughan, Concord, Maple, Woodbridge, Thornhill, Richmond Hill, Markham, Etobicoke and Scarborough.
Frequently Asked Questions
What is a continuous hinge?
A continuous hinge (also called a piano or geared hinge) runs the full height of the door. It spreads the door's weight evenly, so it holds up much better than separate butt hinges on busy commercial doors.
Can you replace butt hinges with a continuous hinge?
Yes. On most aluminum and hollow metal doors we can convert from butt hinges or pivots to a continuous hinge. It fixes sagging and reduces future repairs.
How long does a continuous hinge replacement take?
Most single doors take a few hours on site. We secure the door the same visit.
Can a broken door hinge be repaired, or does it need to be replaced?
It depends on what broke. Stripped screw holes and loose hinges can usually be repaired by filling and re-drilling the holes or using longer screws into the frame. A cracked, bent or worn hinge should be replaced with one of the same size and weight rating, and the door realigned so it closes and locks properly.
Why does my door hinge keep coming loose?
Usually the screws have stripped the wood in the frame or door, the screws are too short to reach the wall framing, or the door is too heavy for its hinges. A strong door closer can also pull on the top hinge. We fix the holes, fit longer screws or heavier hinges, and adjust the closer so it doesn't happen again.
Do you offer emergency door repair?
Yes. We are available 24/7 for broken, sagging or break-in damaged doors across the GTA.
Prices
Service call + 1st hour of labour starts from $175.
The final price depends on the job and the parts you need. Call 647-955-6055 to get a price for your job.
More questions about commercial door hinges
Why is my commercial door sagging?
On busy commercial doors, sagging usually comes from worn hinge knuckles or bearings, loose or stripped hinge screws, or a frame that has torn around the hinge. Heavy aluminum and glass doors and strong closers speed up the wear. Fixing it normally means new hinges and realigning the door, the latch and the closer.
What is the difference between a geared continuous hinge and a pin and barrel hinge?
A geared continuous hinge is made of aluminum sections with interlocking gear teeth under a cover, so it runs quietly and suits aluminum storefront and hollow metal doors. A pin and barrel hinge has stainless steel knuckles around a full-length pin and is often used on heavy steel and fire-rated doors. Both carry the door’s weight along its full height.
Can you replace hinges on a fire-rated door?
Yes. Fire-rated doors need hinges that are rated for that use so the door keeps its rating, and the door must still close and latch on its own afterwards. We fit suitable hinges and adjust the closer and latch. Your building manager or fire inspector can confirm any specific requirements for your building.
What affects the cost of a continuous hinge replacement?
The main factors are the door’s height and material, the type of hinge, and whether the frame needs repair where the old hinge tore out. Doors that also need closer, latch or panic bar adjustment take more time. Call 647-955-6055 with the door type and a description of the problem and we’ll explain the cost.
Is a grinding or squeaking hinge a sign it's failing?
It can be. Squeaky butt hinges sometimes only need lubrication, but grinding, popping or a hinge that feels loose usually means worn bearings or knuckles. Check whether the door has started to drop or rub on the latch side, because that means the hinge is wearing out and should be replaced before it fails.